You are preparing a technical proposal for a customer planning to deploy HPE Aruba Networking Cloud Central-managed AOS-10 Access Points in a typical campus office environment. The customer has relied on ARM-based radio resource management for years with good results. As they transition to AOS-10, they request your guidance on appropriate initial EIRP (Effective Isotropic Radiated Power) values for their new radio profiles in HPE Aruba Networking Central.
Which EIRP configuration option should be recommended as appropriate starting points for such an office deployment?

• A. 2.4 GHz band, set the minimum to 3 dBm and maximum to 9 dBm
• B. Set the minimum 5 GHz bands to be at least 6 dBm higher than the minimum 6 GHz EIRP
• C. Set the minimum 2.4 GHz EIRP the same as the minimum 6 GHz EIRP
• D. 5 GHz band, set the minimum to 18 dBm and maximum to 21 dBm

What is the difference between OM4 and OM5 cabling? (Choose two.)

• A. OM5 supports Multiplexing operating in the 850 to 950 nm range, while OM4 does not
• B. OM5 is approved as wide Band Multimode Fiber (WBMMF), while OM4 is not.
• C. OM5 supports speeds up to 100 Gbps, while OM4 does not.
• D. OM4 supports distances up to 100 m. while OM5 supports distances up to 150 m using 100 GBps transceivers.

'Don't Buy at Us' is a US-based retail company that is expanding into Europe. They are expanding into EMEA with a regional headquarters called HQ2 inside The Netherlands.
Their US-based headquarters HQ1 was refreshed last year based on the HPE Aruba Networking ESP architecture. You have created the design for HQ2 based on the same design as HQ1, a two- tier architecture. The high level is shown below.

Switch BOM for this project based on Two Tier:
Collapsed Core: 2 x 8360-16Y2C in VSX (ISL 2x100GbE DAC)
Access Stack: 10 x Stack of 6200F 48G Class4 PoE 4SFP+ 740W (each stack has 4 members, VSF with 10GbE VSF links) (2 x 10GbE uplink per stack) Based on the scenario, which switch would be a good access layer switch to recommend?

• A. CX 6400
• B. CX 6100
• C. 1950S
• D. 2930
• E. CX 6300F

Due to the type of transport used between regional data centers, the client is experiencing consistently delayed data transmissions. The response time between locations is consistently around 200ms.
What would this phenomenon be classified as?

• A.
  
• B.
  
• C.
  

A global cruise line company needs to refresh its current fleet. They will refresh the 'insides' of the ship to be cost-effective and increase their sustainability. They will replace the complete WLAN/LAN hardware of the ship. In this refresh, the company will not refresh its current security requirements. The CIO also wants to limit the number of unused ports in the switches. Future expansion will always mean a refresh of hardware. They start with the smallest ship with a maximum of 800 guests.
Each ship has a LAN infrastructure consisting of two core switches, up to 10 redundant distribution switches, and up to 500 access switches (400 cabins, 100 technical rooms). The Core switches are located in the MDF of the ship and the distribution switches are located in the IDFs of the ship. Each cabin and technical room gets one single access switch.
The cabling structure of the ship will not be refreshed. Each IDF is connected to the MDF by SMF, of which two pairs are available for the interconnect between the core and distribution. The length of SM fiber between MDF and IDF is less than 300 meters (980 ft) and the type used is OS1. Each cabin is connected by a single OM2 pair to the IDF, the maximum length is 60 meters (200 ft). Each technical room is connected by a single OM2 pair to the IDF, with lengths between
100 and 150 meters (320 and 500 ft).
For each cabin/technical room the customer is looking to replace their current fan-less 2530/2540 without changing the requirements, except they need to upgrade the uplink to distribution switch to 10GbE to handle the increased network traffic, and the technical rooms need redundant power.
The WLAN infrastructure will be 1:1 refreshed without new cabling or new AP locations. Their WLAN infrastructure is based on the 200/300 series indoor and outdoor APs running InstantOS (less than 300 APs), the customer has no change in WLAN requirements.
The cruise line company will replace its current Internet connection before the LAN/WLAN refresh. The new Internet connection will provide a 99.8% uptime, which is needed to ensure the paid guest Wi-Fi is always operational. With this new internet connection, the CIO of the cruise line wants to base the design on the ESP architecture from Aruba because Internet connection is guaranteed.
Based on HPE Aruba Networking best practices and the customer's stated requirements, which segmentation design approach is appropriate for this environment?

• A. Use overlay-based segmentation using VXLAN tunnels between access switches and SD-WAN internet gateway(s).
• B. Implement an on-premises-managed centralized EdgeConnect SD- Branch cluster to isolate guest and internal traffic.
• C. Use traditional VLAN segmentation in the underlay for both management and user traffic.
• D. Migrate to a fully micro-segmented fabric using role-based dynamic overlays and GBP policies for all traffic.