GET Real Nutanix NCP-MCI-6.5 Exam Questions With 100% Refund Guarantee Nov 21, 2023
Get Special Discount Offer on NCP-MCI-6.5 Dumps PDF
NEW QUESTION # 10
An Administrator is working on a one-node ROBO cluster configurations
Which statement is true for this configuration?
- A. Witness vm required to break cluster quoram
- B. witness vm should be 8vcp and 20gb ram
- C. Supported hardware is NX-1175-G5 and G6
- D. the minimum RPO 8 hours required
Answer: C
NEW QUESTION # 11
On a Nutanix cluster, what does Network Segmentation refer to?
- A. A distributed firewall for security VM to VM traffic.
- B. Isolating intra-cluster traffic from guest VM traffic.
- C. Physically separating management traffic from guest VM traffic.
- D. Isolating management traffic from storage replication traffic.
Answer: B
Explanation:
network segmentation on Nutanix clusters refers to creating a separate network for service-specific communication and isolating different types of traffic over selected VLANs or physical interfaces.
https://next.nutanix.com/ncm-intelligent-operations-formerly-prism-pro-ultimate-26/network-segmentation-isolating-service-specific-traffic-39463
https://next.nutanix.com/how-it-works-22/network-segmentation-basics-38414
NEW QUESTION # 12
An administrator has created a Nutanix managed it a VLAN ID of 512.
Several VMs have been created, and the administrator notices that the can successfully communicate with other VMs on that VLAN.
Provided they are on the host, but cannot communicate with VMs that reside on different hosts in the cluster.
What is most likely thee cause of this issue?
- A. The VLAN was not created on the upstream switches.
- B. There is a firewall rule blockingVLAN512 traffic.
- C. The administrator did not create the VLAN on all hosts
- D. VLANS12 is a reserved VLAN ID, and not usable for guest VMs.
Answer: A
NEW QUESTION # 13
Refer to Exhibit.
An administrator increases the cluster RF to 3. The containers are not modified.
What will the new values in the data resiliency dashboard be for FAILURES TOLERABLE for the Zookeeper and Extent Groups components?
- A. Zookeeper = 1 and Extent Groups = 1
- B. Zookeeper = 1 and Extent Groups = 2
- C. Zookeeper = 2 and Extent Groups = 1
- D. Zookeeper = 2 and Extent Groups = 2
Answer: C
NEW QUESTION # 14
A system administrator needs to add more VMs to their Nutanix cluster.
Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)
- A. Determine utilization with Cluster Runway
- B. Enable Deduplication and Ensure Coding
- C. Perform an inventory with Life Cycle Management
- D. Utilize Optimize Resources for VM efficiency
Answer: A,D
NEW QUESTION # 15
An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.
Which steps should the administrator perform next?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements.
Answer:
Explanation:
Reference:
https://next.nutanix.com/how-it-works-22/scheduled-power-outage-relocating-cluster-hardware-if-you-need-to-shut-down-all-the-nodes-in-your-ahv-cluster-here-s-how-37326
NEW QUESTION # 16
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
- A. Use Cross-Hypervisor DR.
- B. Import the .vmdk into the Image Service.
- C. Deploy the Move appliance.
- D. Use shared nothing live migration.
Answer: A,C
NEW QUESTION # 17
An administrator is troubleshooting vDisk performance issues in a Nutanix cluster with hybrid disks. The VMs all have Flash Mode enabled.
But users are reporting disk latency.
What could cause the performance issues?
- A. The VMs vDisks are in multiple containers.
- B. Data size for flash mode exceeds 25% of the SSD capacity.
- C. Compression is disabled on the vDisk storage container.
- D. Flash mode is disabled when a node fails.
Answer: B
NEW QUESTION # 18
What is the minimum time a newly created Deduplication storage policy takes to apply to the VMs in the container?
- A. 60 minutes
- B. 30 minutes
- C. 10 minutes
- D. 5 Minutes
Answer: B
NEW QUESTION # 19
An administrator has been asked to enable block awareness and increase the fault tolerance to FT2 on a Nutanix AHV cluster with the following configuration:
Four blocks
One node per block
Will the administrator be able to accomplish these tasks?
- A. No-FT2 requires a minimum of five nodes.
- B. Yes-FT2 requires a minimum of three nodes.
- C. Yes-Block awareness requires a minimum of three blocks.
- D. No-Fault tolerance changes are not supported.
Answer: A
NEW QUESTION # 20
While installing Windows 2019 on a new VM on an AHV cluster, an administrator notices there aren't any drives listed for the install.
What might the problem be?
- A. VirtIO drivers have not yet been installed and the disks are SCSI disks.
- B. VirtIO drivers aren't supported on this version of Windows 2019.
- C. VirtIO drivers have not yet been installed and the disks are IDE disks.
- D. VirtIO drivers must be installed on AHV for installations of Windows.
Answer: A
Explanation:
VirtIO drivers are device drivers that are specifically designed for virtualized environments. They allow the guest operating system to communicate directly with the underlying hardware, bypassing the emulation layer. This improves the performance and efficiency of the virtual machines. VirtIO drivers are supported by various hypervisors, including Nutanix AHV1.
Nutanix AHV uses SCSI disks for VMs by default. However, Windows does not have native support for SCSI disks and requires VirtIO drivers to recognize them. Therefore, if an administrator is installing Windows 2019 on a new VM on an AHV cluster, they need to install the VirtIO drivers before selecting the destination disk for the installation. Otherwise, they will not see any drives listed for the install2.
To install the VirtIO drivers during Windows installation, the administrator can use one of the following methods3:
Use a VirtIO ISO image that contains the driver files. The administrator can download the VirtIO ISO image from the Nutanix support portal and upload it to the AHV image service. Then, they can attach the VirtIO ISO image to the VM as a CD-ROM device and load the driver from it during Windows installation.
Use a Nutanix Guest Tools (NGT) ISO image that contains the driver files and other tools. The administrator can download the NGT ISO image from Prism Element or Prism Central and attach it to the VM as a CD-ROM device. Then, they can load the driver from it during Windows installation.
Use a floppy disk image that contains only the driver files. The administrator can create a floppy disk image using tools such as WinImage or WinRAR and upload it to the AHV image service. Then, they can attach the floppy disk image to the VM as a floppy device and load the driver from it during Windows installation.
NEW QUESTION # 21
The administrator recently had a node fail in an AHV Nutanix cluster. All of the VMs restarted on other nodes in the cluster, but they discovered that the VMs that make up a SQL cluster were running on the failed host. The administrator has been asked to take measures to prevent a SQL outage in the future.
What affinity option will prevent the SQL VMs from running on the same hos?
- A. Create Affinity Category
- B. VM-Most Affinity policy
- C. Create Affinity Project
- D. VM-VM anti-Affinity policy
Answer: D
NEW QUESTION # 22
An administrator is configuring data protection and DR for a multi-tier application. All VMs must be protected at the same time.
What must the administrator do to meet this requirement?
- A. Create a consistency group for the application and place all VMs in it
- B. Create a consistency group for each VM with identical schedules
- C. Create a protection domain for the application and select auto-protect related entities
- D. Create a protection domain for each VM with identical schedules
Answer: A
Explanation:
According to the web search results, a consistency group is a group of related applications or services that must be recovered together in order to work properly, and this means more than being recovered at the same time67. They also typically need to be recovered to the same point in time6. Therefore, to meet the requirement of protecting all VMs of a multi-tier application at the same time, the administrator must create a consistency group for the application and place all VMs in it8. This way, the administrator can apply data protection policies and schedules to the entire consistency group as a single unit8.
NEW QUESTION # 23
Prism Central will be installed manually on an AHV cluster.
Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)
- A. data
- B. var
- C. home
- D. tmp
- E. boot
Answer: A,C,E
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-sc
NEW QUESTION # 24
An administrator has been alerted to a VM that has high I/O latency and wants to determine if there are any other factors, such as insufficient network or memory resources that correlate, as part of a troubleshooting process.
Which type of chart should the administrator create to allow all relevant data to be easily exported to CSV for later analysis?
- A. A cluster entity chart with each of the relevant metrics
- B. A cluster metric chart for each of the relevant metrics
- C. A VM entity chart with each of the relevant metrics.
- D. A VM metric chart for each of the relevant metrics
Answer: D
NEW QUESTION # 25
What is a requirement to enable Flow Neworking?
- A. Prims Central is using a three-node scale-out deployment
- B. A dedicated virtual switch has been created for Flow Networking.
- C. Microservices infrastructure must be enabled.
- D. Flow Micro segmentation must be enabled.
Answer: C
Explanation:
Flow Networking is a feature that enables software-defined networking for AHV clusters. It allows users to create and manage virtual private clouds (VPCs), subnets, and network services such as NAT, DHCP, routing, and VPN. Flow Networking also supports service insertion and chaining, which enables integration with third-party network functions such as firewalls and load balancers. Flow Networking is built on top of the microservices infrastructure (MSP) in Prism Central, which provides the platform for running various Nutanix services such as Calm, Karbon, and Objects. Therefore, to enable Flow Networking, the MSP must be enabled first on Prism Central1. The MSP can be enabled from the Prism Central settings page or from the command line interface (CLI) of the Prism Central VM2. Enabling the MSP will also enable Flow Microsegmentation, which is another feature that provides network security and visibility for AHV clusters.
NEW QUESTION # 26
Which Nutanix service control ncli, the HTML5 UI, and Rest API?
- A. Chronos
- B. Cassandra
- C. Zookeeper
- D. Prism
Answer: D
Explanation:
Prism is the central service control used by Nutanix to manage the clusters. It provides a unified view of the entire system, and it is used to control the HTML5 UI, the nCLI, and the REST API. Prism is used to manage the resources of the system, such as the nodes, storage, and networks, as well as to monitor the performance of the system and the applications running on it.
https://www.nutanixbible.com/2f-book-of-basics-cluster-components.html
Prism
Key Role: UI and API
* Prism is the management gateway for components and administrators to configure and monitor the Nutanix cluster. This includes Ncli, the HTML5 UI, and REST API.
* Prism runs on every node in the cluster and uses an elected leader like all components in the cluster. All requests are forwarded to the leader using Linux Iptables. This allows access to PRISM using any CVM Ip address.
* Prism communicates with Zeus for cluster configuration data and Cassandra for statistics to present to the user. It also communicates with the ESXi hosts for VM status and related information These are only some of the essential services that make up the CVM functionality. For more information on all the services and various Nutanix Cluster components, refer to the portal documentation.
NEW QUESTION # 27
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Change the VLAN ID to a higher priority ID.
- B. Remove any 1Gb interfaces still connected from the default bond.
- C. Change the bond mode to balance-slb or balance-tcp.
- D. Add a new switch to the network and connect 1Gb interfaces to it.
- E. Connect the 10Gb interfaces to the physical switch.
Answer: B,C,E
Explanation:
These are the three steps that the administrator must take to increase throughput to the host. According to the network diagram, the host has two 10Gb interfaces and two 1Gb interfaces in the default bond, but only one of the 10Gb interfaces is connected to a switch. The other 10Gb interface is disconnected and has a red "X" on it. The two 1Gb interfaces are also disconnected and have dotted lines. This means that the host is using only one 10Gb interface for all its network traffic, which limits its maximum bandwidth to 10 Gbps.
To increase the throughput, the administrator should connect both 10Gb interfaces to the physical switch, preferably to different switches for redundancy and high availability. This will allow the host to use both 10Gb interfaces for network traffic, which can increase its maximum bandwidth to 20 Gbps. However, this also requires changing the bond mode from active-backup to balance-slb or balance-tcp, which are load balancing modes that distribute network traffic across multiple interfaces based on source MAC address or TCP session1. The default bond mode of active-backup only uses one interface at a time and switches to another interface only when the active one fails2.
Finally, the administrator should remove any 1Gb interfaces still connected from the default bond, as they are not needed and may cause performance issues or conflicts with the load balancing modes. The 1Gb interfaces can be used for other purposes, such as management or backup networks, by creating separate bonds or bridges for them3. Alternatively, they can be left disconnected if they are not required.
NEW QUESTION # 28
An administrator has an AHV cluster that is comprised of 4 nodes with the following configuration in each node:
CPU:2 each 2.4GHz, 12 core
Memory: 256GB
Disk: 6 each 1.92 SSD
A VM with 16 vCPUs and 96GB of RAM is being created on the cluster.
How should the administrator configure the VM to assure optimal performance?
- A. With Flash Mode enabled
- B. With memory overcommit
- C. With an affinity policy
- D. With 2 vNUMA nodes
Answer: D
Explanation:
The best way to configure the VM for optimal performance is to set it up with 2 vNUMA nodes. This will ensure that the VM is configured to take advantage of the CPU and memory resources available in each node, and it will also ensure that all of the cores are utilized for the best performance. Additionally, the administrator should ensure that the VM has an affinity policy set up so that the vCPUs are evenly distributed across the four nodes. Finally, Flash Mode should be enabled in order to take advantage of the high-performance SSDs that are available in the cluster
NEW QUESTION # 29
Refer to exhibit:
What could be the cause for this behavior?
- A. Images are corrupted and must be re-uploaded.
- B. RBAC is configured and the administrator's user doesn't have the right privileges.
- C. Images were imported into Prism Central.
- D. The files were ISO but were uploaded as disk images hence cannot be used or edited.
Answer: C
Explanation:
According to Nutanix Support & Insights1, image create, update, and delete (CUD) behavior depends on whether a cluster (also known as Prism Element) is registered to Prism Central. Images created on a Prism Element reside on Prism Element and can be managed from Prism Element. For better centralized management, you can migrate images manually to Prism Central by using the image import feature.
NEW QUESTION # 30
The Update Source for LCM has been configured as shown in the exhibit. Inventory is failing consistently.
What is the likely cause of this issue?
- A. Port 433 Is blocked by a firewall.
- B. Port 80 is blocked by a firewall.
- C. The license assigned to the cluster has expired.
- D. The administrator does not have a valid portal account.
Answer: A
NEW QUESTION # 31
Which best practice should be followed when creating a bond in a Nutanix cluster?
- A. Only utilize NICs of the same speed within the same bond
- B. Configure the bond to use LACP
- C. Use the default bond configuration after installation
- D. Place NICs of different speeds within the same bond
Answer: D
NEW QUESTION # 32
A VM in a 12-node Nutanix cluster is hosting an application that has specific Physical GPU requirements. Only three nodes in the cluster meet this requirement.
The administrator wants to allow a general workload to be distributed across all nodes in the cluster and must make sure that the node hosting the VM meets its requirements.
How should the administrator perform this task?
- A. Configure VM-Host affinity for the nodes that meet the application's GPU requirement.
- B. Create a sperate three-node cluster using the nodes that meet the requirement.
- C. Over-Provision the application VM with additional virtual GPUs.
- D. Configure anti-affinity rules between the application VM and the other VMs running on the cluster.
Answer: A
Explanation:
Configure VM-Host affinity for the nodes that meet the application's GPU requirement. This is because VM-Host affinity allows the administrator to specify which nodes a VM can run on or must not run on1. By creating a VM-Host affinity rule that binds the application VM to the three nodes that have the physical GPU, the administrator can ensure that the VM will always run on a node that meets its requirement, regardless of any HA or migration events. This also allows the other nodes in the cluster to host other VMs without any restrictions.
NEW QUESTION # 33
A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:
IP address:172,16.1.2
Network Mask: 255.255.255.0
Default gateway: 172.16.1.1
VLAN:1
The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...
What should the Nutanix administrator do to fix this issue?
- A. Enable IPv6 on the VM.
- B. Use DHCP as opposed to static IP
- C. Nutanix removed support for native VLAN.
- D. Change VLAN field from vlan. 1 to vlan.0.
Answer: D
NEW QUESTION # 34
Refer to Exhibit:
An administrator is trying to create a custom alert policy for all VMs.
Why is the Alert warning if field greyed cut?
- A. The Behavioral Anomaly threshold is set.
- B. The Enable Policy option checked.
- C. The Auto resolve alerts option is checked.
- D. The Alert critical if threshold is set.
Answer: A
Explanation:
when you create a custom alert policy, you can choose between two types of thresholds: Static Threshold and Behavioral Anomaly. Static Threshold allows you to set a fixed value for the metric that triggers the alert. Behavioral Anomaly allows you to use machine learning to detect abnormal behavior based on historical data.
If you select Behavioral Anomaly as the threshold type, you cannot set a warning level for the alert. You can only set a critical level that indicates how much deviation from normal behavior is considered an anomaly3. Therefore, the Alert warning if field is greyed out when you select Behavioral Anomaly.
NEW QUESTION # 35
......
Nutanix NCP-MCI-6.5 (Nutanix Certified Professional - Multicloud Infrastructure (NCP-MCI) v6.5) Exam is a certification exam designed to test the knowledge and skills of IT professionals in deploying, managing, and scaling Nutanix infrastructure across multiple clouds. It is a comprehensive exam that covers a wide range of topics related to multicloud infrastructure, including how to design, deploy, and administer Nutanix clusters, as well as how to optimize and troubleshoot them.
PDF Download Nutanix Test To Gain Brilliante Result!: https://www.pdf4test.com/NCP-MCI-6.5-dump-torrent.html
Provide Updated Nutanix NCP-MCI-6.5 Dumps as Practice Test and PDF: https://drive.google.com/open?id=1kd7OXY-DlSuZ-YxJWrI6tJO3KV7Cd3q5
