One-year free updating

You will have access to free update your Constructing Secure optimized WANs v2.0 exam pdf one-year after you purchase. Once there is latest version released, we will send it your email immediately. What you need to do is checking your email.

24/7 customer assisting

There are 24/7 customer assisting to support you in case you may encounter some questions like downloading. Please feel free to contact us if you have any questions.

Instant Download: Our system will send you the GB0-391 braindumps files you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

About H3C GB0-391 Test Braindumps

Do you want to pass H3C actual test at first attempt quickly? May be you need right study materials. As a professional certification dumps leader, we focus on the study of H3CSE-Routing & Switching valid test for many years. You can find the most accurate Constructing Secure optimized WANs v2.0 test questions and latest study guide to overcome the difficulty of GB0-391 valid test. Our website not only offers you valid H3C exam pdf, but also offers you the most comprehensive service. The aim of us is providing you with the most reliable products and the best-quality service, which is the key of our success.

All of our GB0-391 Constructing Secure optimized WANs v2.0 test questions are written by a team of IT experts who are specialized in the H3CSE-Routing & Switching practice test. They constantly keep the updating of Constructing Secure optimized WANs v2.0 dumps pdf to ensure the accuracy of our questions. Before you decide to buy, you can download the free demo of Constructing Secure optimized WANs v2.0 exam pdf to learn about our products. You will find that our Constructing Secure optimized WANs v2.0 test questions are affordable, latest and best-quality with detailed explanations and right Constructing Secure optimized WANs v2.0 test answers, which save you lots of time and money.

Choosing PDF4Test, choosing success. According to our center data shown, the pass rate of Constructing Secure optimized WANs v2.0 valid test is up to 95%. The feedback from our candidates said that our Constructing Secure optimized WANs v2.0 test questions mostly cover the same topic in the actual test. So if you practice Constructing Secure optimized WANs v2.0 dumps pdf seriously and review the study materials, passing Constructing Secure optimized WANs v2.0 actual test will be not difficult.

No Help, Full Refund

We promise you full refund if you failed the test with our Constructing Secure optimized WANs v2.0 dumps pdf. Or you can choose to wait the updating or free change to other dumps if you have other test. If you decide to refund, please send the score report to us, we will get your money back after comfirmation.

H3C Constructing Secure optimized WANs v2.0 Sample Questions:

1. When the link type of the ONU port is Trunk , its processing method for upstream packets is _____ .

A) for without receipt of the Tag message, add the default VLAN Tag ; for received with Tag packets forwarded directly
B) Only allow tagged messages to pass
C) Only allow the packets with the default LAN Tag to pass and go to the tag
D) only allowed without Tag packets to pass through, and the packets add the default VLAN of Tag

2. The information displayed on the MSR router is as follows:
acl number 2000
rule 0 permit source 192.168.0.0 0.0.0.255
acl number 2002
rule 0 permit source 192.168.2.0 0.0.0.255
#
traffic classifier 2 operator and
if-match acl 2002
traffic classifier 1 operator and
if-match acl 2000
#
traffic behavior 2
queue af bandwidth pct 30
traffic behavior 1
queue ef bandwidth pct 30 cbs-ratio 25
#
qos polic test
classifier 1 behavior 1
classifier 2 behavior 2
#
interface GigabitEthernet0/1
port link-mode route
duplex full
speed 10
ip address 192.168.1.1 255.255.255.0
qos appl polic test outbound
When the traffic rate of the packets with the source addresses of 192.168.0.2 , 192.168.2.2 , and 192.168.3.2 are 4Mbps , 4Mbps , 6Mbps , and no other background traffic is forwarded from port G0/1_ .
Then the following statement is correct _____

A) The forwarding rate of packets with the source address of 192.168.2.2 is about 1.5Mbps
B) The forwarding rate of packets with the source address of 192.168.0.2 is about 3Mbps
C) The forwarding rate of packets with the source address of 192.168.0.2 is about 4Mbps
D) The forwarding rate of packets with the source address of 192.168.0.2 is about 1.5Mbps
E) The forwarding rate of packets with the source address of 192.168.2.2 is about 3Mbps
F) The forwarding rate of packets with the source address of 192.168.2.2 is about 4Mbps

3. It can be judged that this is a technical application based on the networking shown in the figure and the following configuration.
RTA:
[RTA] ike peer 123
[RTA-ike-peer-123] pre-shared-ke simple 123
[RTA-ike-peer-123] remote-address 100.1.1.2
.......<-i
IRTA-ike-peer-123] local-address 100.1.1.1
[RTA-ike-peer-123]quit
[RTA] ipsec proposal 1
IRTA-ipsec-propos al-l]quit
[RTA]acl number 3000
[RTA-acl-adv-3000] rule 0 permit ip source 192.168.1.0 0.0.0.255 destination 192.168.2.0 0.0.0.255
[RTA]ipsec polic 1 1 isakmp
[RTA-ipsec-polic-isakmp-ll] securit acl 3000
[RTA-ipsec-polic-isakmp-ll] ike-peer 123
[RTA-ipscec-polic-isakmp-ll] proposal 1
[RTA-ipsec-polic-isakmp-ll] quit
[RTA] interface EthernetO/1/1
[RTA-Ethernet0/1/1] ip address 10.1.1.1 255.255.255.0
[RTA] interface EthernetO/l/0
[RTA-Ethernet0/1/0] ip address 192.168.1.1 255.255.255.0
[RTA] interface Loopback0
[RTA-LoopbackO]ip address 1.1.1.1 255.255.255.255
[RTA] interface Tunnel 1
[RTA-Tunnel1]source 1.1.1.1
[RTA-Tunnel1]destination 2.2.2.2
[RTA-Tunnell]ip address 100.1.1.1 255.255.255.0
[RTA-Tunnel1]keepalive
[RTA-Tunnell]ipsec polic 1
[RTA] ip route-static 2.2.2.2 255.255.255.255 10.1.1.2
[RTA] ip route-static 192.168.2.0 255.255.255.0 100.1.1.2
RTB:
[RTB] ike peer 123
[RTB-ike-peer-123] pre-shared-ke simple 123
[RTB-ike-peer-123] remote-address 100.1.1.1
[RTB-ike-peer-123] local-address 100.1.1.2
[RTB-ike-peer-123]quit
[RTB] ipsec proposal 1
[RTB-ipsec-proposal-l] quit
[RTB]acl number 3000
[RTB-acl-adv-3000] rule o permit ip source 192.168.2.0 0.0.0.255 destination 192.168.1.0 0.0.0.255
[RTB]ipsec polic 1 1 isakmp
[RTB-ipsec-polic-isakmp-ll] securit acl 3000
[RTB-ipsec-polic-isakmp-ll] ike-peer 123
[RTB-ipsec-polic-isakmp-ll] proposal 1
[RTB-ipsec-polic-isakmp-ll] quit
[RTB] interface Ethernet0/1/1
[RTB-Ethernet0/1/1] ip address 10.1.1.2 255.255.255.0
[RTB] interface Ethernet0/1/0
[RTB-Ethernet0/1/0] ip address 192.168.2.1 255.255.255.0
[RTB] interface Loopback0
[RTB-Loopback0] ip address 2.2.2.2 255.255.255.255
[RTB] interface Tunnell
[RTB-Tunnell]source 2.2.2.2
[RTB-Tunnell]destination l.1.1.1
[RTB-Tunnell]ip address 100.1.1.2 255.255.255.0
[RTB-Tunnell]keepalive
[RTA-Tunnell]ipsec polic 1
[RTB] ip route-static l.1.1.1 255.255.255.255 10.1.1.1
[RTB] ip route-static 1 92.1 68.1.0 255.255.255.0 1 00.1.1 .1

A) IPSec over GRE
B) L2TP over IPsec
C) IPSec over L2TP
D) GRE over IPsec

4. A company PBX via an E1 connection line to the telephone network operators, due to expansion of the company's size, complicated by the need to meet the 50 -way voice calls, you need to apply for ____ root E1 line ? ( Fill in Arabic numerals )

5. below with respect to the AH ( the Authentication Header , Authentication Header ) and the ESP ( Encapsulating Securit Paload , the Encapsulating Security Payload ) described right there ____ .( Choose one or more )

A) two who can be used at the same time
B) two who can provide confidentiality protection
C) AH cannot provide data integrity protection
D) two who can provide data origin authentication and optional anti-replay service

Solutions: